{"id":329,"date":"2023-08-08T17:27:13","date_gmt":"2023-08-08T08:27:13","guid":{"rendered":"http:\/\/tech.itdesk.co.kr\/?p=329"},"modified":"2023-08-08T17:40:55","modified_gmt":"2023-08-08T08:40:55","slug":"cisco-san-switch-%ea%b8%b0%eb%b3%b8-%eb%aa%85%eb%a0%b9-zonning","status":"publish","type":"post","link":"https:\/\/iwgh.duckdns.org\/?p=329","title":{"rendered":"Cisco SAN Switch \uae30\ubcf8 \uba85\ub839 \/ zonning"},"content":{"rendered":"\n
    \n
  1. \uc0c1\ud0dc\ud655\uc778 \uba85\ub839\uc5b4<\/li>\n\n\n\n
  2. \uae30\ubcf8 \uad6c\uc131<\/li>\n\n\n\n
  3. SAN Zonning \uad6c\uc131<\/li>\n<\/ol>\n\n\n\n
    \n\n\n\n
    1. \uc0c1\ud0dc\ud655\uc778 \uba85\ub839\uc5b4<\/h5>\n\n\n\n
    # show version<\/strong> ; \ubc84\uc804 \ud655\uc778<\/h6>\n\n\n\n
    \n
    SAN8P# show version<\/span><\/code><\/em>

    Cisco Nexus Operating System (NX-OS) Software<\/span><\/span><\/code><\/em>
    TAC support: http:\/\/www.cisco.com\/tac<\/code><\/span><\/em>
    Documents: ...<\/span><\/span><\/code><\/code><\/em>

    Software<\/span><\/code><\/em>
    BIOS: version 2.1.17<\/span><\/code><\/em>
    loader: version N\/A<\/span><\/code><\/em>
    kickstart: version 8.4(2a)<\/span><\/code><\/em>
    system: version 8.4(2a)<\/span><\/strong><\/span><\/code><\/em>
    BIOS compile time: 01\/08\/14<\/span><\/code><\/em>
    kickstart image file is: ...<\/span><\/code><\/code><\/em>

    Hardware<\/span><\/code><\/em>
    cisco MDS 9148S 16G 48 FC (1 Slot) Chassis (\"2\/4\/8\/16 Gbps FC\/Supervisor\")<\/span><\/code><\/em>
    Motorola, e500v2 with 4088624 kB of memory.<\/span><\/code><\/em>
    Processor Board ID JAE2532----<\/span><\/code><\/em>

    Device name: SAN8P<\/span><\/code><\/em>
    bootflash: 4001760 kB<\/span><\/code><\/em>

    Kernel uptime is 316 day(s), 19 hour(s), 15 minute(s), 32 second(s)<\/span><\/code><\/em>

    Last reset at 456977 usecs after Sat Sep 24 23:08:01 2022<\/span><\/code><\/em>
    Reason: Reset Requested by CLI command reload<\/span><\/code><\/em>
    System version: 8.4(2a)<\/span><\/code><\/em>
    Service:<\/span><\/code><\/em>

    plugin<\/span><\/code><\/em>
    Core Plugin<\/span><\/code><\/em><\/pre>\n<\/blockquote>\n\n\n\n
    # show hardware<\/strong> ;\ud558\ub4dc\uc6e8\uc5b4 \uc0c1\ud0dc\ud655\uc778(uptime, FAN, Power\ub4f1)<\/h6>\n\n\n\n
    \n
    SAN8P# show hardware<\/em><\/code>

    Cisco Nexus Operating System (NX-OS) Software<\/em><\/span>
    TAC support: ...<\/em><\/span>

    Software<\/em><\/span>
    BIOS: version 2.1.17<\/em><\/span>
    loader: version N\/A<\/em><\/span>
    kickstart: version 8.4(2a)<\/em><\/span>
    system: version 8.4(2a)<\/em><\/span>
    BIOS compile time: 01\/08\/14<\/em><\/span>
    kickstart image file is:...<\/em><\/span>

    Hardware<\/em><\/span>
    cisco MDS 9148S 16G 48 FC (1 Slot) Chassis (\"2\/4\/8\/16 Gbps FC\/Supervisor\")<\/em><\/span>
    Motorola, e500v2 with 4088624 kB of memory.<\/em><\/span>
    Processor Board ID JAE25320GNU<\/em><\/span>

    Device name: SAN8P<\/em><\/span>
    bootflash: 4001760 kB<\/em><\/span>

    Kernel uptime is 316 day(s)<\/span>, 19 hour(s), 16 minute(s), 26 second(s)<\/em><\/span>

    Last reset at 456977 usecs after Sat Sep 24 23:08:01 2022<\/em><\/span>
    Reason: Reset Requested by CLI command reload<\/em><\/span>
    System version: 8.4(2a)<\/em><\/span>
    Service:<\/em><\/span>

    plugin<\/em><\/span>
    Core Plugin<\/em><\/span>
    --------------------------------<\/em><\/span>
    Switch hardware ID information<\/em><\/span>
    --------------------------------<\/em><\/span>
    Switch is booted up<\/em><\/span>
    Switch type is : MDS 9148S 16G 48 FC (1 Slot) Chassis<\/em><\/span>
    Model number is DS-C9148S-K9<\/em><\/span>
    H\/W version is 1.1<\/em><\/span>
    Part Number is 73-15809-02<\/em><\/span>
    Part Revision is B0<\/em><\/span>
    Manufacture Date is Year 25 Week 25<\/em><\/span>
    Serial number is JPG2525----<\/em><\/span>
    CLEI code is CMMZJ00ARA<\/em><\/span>

    --------------------------------<\/em><\/span>
    Chassis has 1 Module slots<\/em><\/span>
    --------------------------------<\/em><\/span>
    --More--<\/em><\/span>
    Module1 ok<\/em><\/span>
    Module type is :...<\/em><\/span>

    ---------------------------------------<\/em><\/span>
    Chassis has 2 PowerSupply Slots<\/em><\/span>
    ---------------------------------------<\/em><\/span>

    PS1 ok<\/em><\/span>
    Power supply type is: 300.00W 110v\/220v AC<\/em><\/span>
    Model number is...<\/em><\/span>

    PS2 ok<\/em><\/span>
    Power supply type is: 300.00W 110v\/220v AC<\/em><\/span>
    Model number is...<\/em><\/span>

    ----------------------------------<\/em><\/span>
    Chassis has 4 Fan slots<\/em><\/span>
    ----------------------------------<\/em><\/span>
    Fan1 ok<\/em><\/span>

    Fan2 ok<\/em><\/span>

    Fan3 ok<\/em><\/span>

    Fan4 ok<\/em><\/span><\/pre>\n<\/blockquote>\n\n\n\n

    # show system resources<\/strong> ; cpu\/mem \uc0ac\uc6a9\ub7c9<\/h6>\n\n\n\n
    \n
    STXSAN8P# show system resources<\/em><\/span>
    Load average: 1 minute: 0.21 5 minutes: 0.13 15 minutes: 0.14<\/em><\/span>
    Processes : 213 total, 1 running<\/em><\/span>
    CPU states : 1.50% user, 1.00% kernel, 97.50% idle<\/em><\/span>
    CPU0 states : 0.00% user, 1.00% kernel, 99.00% idle<\/em><\/span>
    CPU1 states : 3.00% user, 1.00% kernel, 96.00% idle<\/em><\/span>
    Memory usage: 4088624K total, 1587088K used, 2501536K free<\/em><\/span>
    Current memory status: OK<\/em><\/span><\/pre>\n<\/blockquote>\n\n\n\n

    # show interface brief<\/strong> ; \uc778\ud130\ud398\uc774\uc2a4 \uc5f0\uacb0 \uc0c1\ud0dc<\/h6>\n\n\n\n
    \n
    SAN8P# show interface brief<\/em><\/span>

    -----------------------------------------------------------------------------------------<\/em><\/span>
    Interface Vsan Admin Admin Status SFP Oper Oper Port Logical<\/em><\/span>
    Mode Trunk Mode Speed Channel Type<\/em><\/span>
    Mode (Gbps)<\/em><\/span>
    -----------------------------------------------------------------------------------------<\/em><\/span>
    fc1\/1 2 auto on up swl F 4 -- edge <\/em><\/span>
    fc1\/2 2 auto on up swl F 4 -- edge <\/em><\/span>
    fc1\/3 2 auto on up swl F 4 -- edge <\/em><\/span>
    fc1\/4 2 auto on up swl F 4 -- edge <\/em><\/span>
    fc1\/5 2 auto on notConnected swl -- -- -- -- <\/em><\/span>
    fc1\/6 2 auto on notConnected swl -- -- -- -- <\/em><\/span>
    fc1\/7 2 auto on up swl F 16 -- edge <\/em><\/span>
    fc1\/8 2 auto on up swl F 16 -- edge <\/em><\/span>
    fc1\/9 1 auto on sfpAbsent -- -- -- -- -- <\/em><\/span>
    fc1\/10 1 auto on sfpAbsent -- -- -- -- --<\/em><\/span><\/pre>\n<\/blockquote>\n\n\n\n

    # show flogi database<\/strong> ; \uc778\ud130\ud398\uc774\uc2a4 \uc5f0\uacb0 wwn \ud655\uc778<\/h6>\n\n\n\n
    \n
    SAN8P# show flogi database<\/em><\/span>

    --------------------------------------------------------------------------------<\/em><\/span>
    INTERFACE VSAN FCID PORT NAME NODE NAME <\/em><\/span>
    --------------------------------------------------------------------------------<\/em><\/span>
    fc1\/1 2 0x270000 50:01:43:80:01:32:7f:8c 50:01:43:80:01:32:7f:8d <\/em><\/span>
    fc1\/2 2 0x270100 50:01:43:80:01:32:7f:ac 50:01:43:80:01:32:7f:ad <\/em><\/span>
    fc1\/3 2 0x270200 50:01:43:80:04:bd:a5:80 50:01:43:80:04:bd:a5:81 <\/em><\/span>
    fc1\/4 2 0x270300 50:06:0b:00:00:60:48:da 50:06:0b:00:00:60:48:db <\/em><\/span>
    fc1\/7 2 0x270400 24:70:00:c0:ff:66:5d:a2 20:80:00:c0:ff:66:5d:a2 <\/em><\/span>
    fc1\/8 2 0x270500 20:70:00:c0:ff:66:5d:a2 20:80:00:c0:ff:66:5d:a2<\/em><\/span>

    Total number of flogi = 6.<\/em><\/span><\/pre>\n<\/blockquote>\n\n\n\n

    # show log<\/strong> ; \uac04\ub2e8\ud55c \ub85c\uadf8\ud655\uc778<\/h6>\n\n\n\n
    \n
    SAN8P# show log<\/em><\/span>


    Logging console: enabled (Severity: critical)<\/em><\/span>
    Logging monitor: enabled (Severity: notifications)<\/em><\/span>
    Logging linecard: enabled (Severity: notifications)<\/em><\/span>
    Logging server: disabled<\/em><\/span>
    Logging origin_id : disabled<\/em><\/span>
    Logging rate-limit: enabled<\/em><\/span>
    Logging logfile: enabled<\/em><\/span>
    Name - messages: Severity - notifications Size - 4194304<\/em><\/span>

    Logging persistent : disabled (Reason: Logflash CF card not online.)<\/em><\/span>


    Syslog History Table: '1' maximum table entries
    ......
    ......
    2022 Sep 24 23:12:07 switch %PORT-5-IF_DOWN_NONE: %$VSAN 1%$ Interface fc1\/48 is down (None) 
    2022 Sep 24 23:12:08 switch %PORT-5-IF_DOWN_INACTIVE: %$VSAN 4094%$ Interface fc1\/1 is down (Inactive) 
    2022 Sep 24 23:12:08 switch %PMON-SLOT1-2-PMON_CRIT_INFO: Port Monitor Critical Information: Policy (slowdrain) activation is successfull .
    2022 Sep 24 23:12:08 switch %PORT-5-IF_DOWN_INACTIVE: %$VSAN 4094%$ Interface fc1\/2 is down (Inactive) 
    2022 Sep 24 23:12:09 switch %PLATFORM-5-PS_FOUND: Power supply 1 found (Serial number QCS25272LU5)
    2022 Sep 24 23:12:09 switch %PLATFORM-2-PS_OK: Power supply 1 ok(Serial number QCS25272LU5)
    2022 Sep 24 23:12:09 switch %PLATFORM-5-PS_STATUS: PowerSupply 1 current-status is PS_OK 
    <\/em><\/span><\/pre>\n<\/blockquote>\n\n\n\n
    # show logging logfile<\/strong> ; \uc138\ubd80\uc801\uc778 \ub85c\uadf8\ud655\uc778<\/h6>\n\n\n\n
    \n
    SAN8P# show logging logfile<\/em><\/span>
    2022 Nov 22 00:43:18 switch %POAP-2-POAP_FAILURE: POAP DHCP discover phase failed<\/em><\/span>
    2022 Nov 22 00:43:20 switch %POAP-2-POAP_INFO: Abort Power On Auto Provisioning and continue with normal setup? (yes\/no)[n]: <\/em><\/span>
    2022 Nov 22 00:43:20 switch %VSHD-5-VSHD_SYSLOG_CONFIG_I: Configured from vty by root on vsh.15135<\/em><\/span>
    2022 Nov 22 00:43:20 switch %POAP-2-POAP_INFO: USB disk not detected<\/em><\/span>
    2022 Nov 22 00:43:20 switch %POAP-2-POAP_INFO: Start DHCP v4 session<\/em><\/span>
    2022 Nov 22 00:43:20 switch %POAP-2-POAP_DHCP_DISCOVER_START: POAP DHCP Discover phase started<\/em><\/span>
    2022 Nov 22 00:43:20 switch %POAP-2-POAP_INFO: Abort Power On Auto Provisioning and continue with normal setup? (yes\/no)[n]: <\/em><\/span>
    2022 Nov 22 00:43:21 switch %VSHD-5-VSHD_SYSLOG_CONFIG_I: Configured from vty by root on vsh.15139<\/em><\/span>
    2022 Nov 22 00:43:27 switch %POAP-2-POAP_FAILURE: POAP DHCP discover phase failed<\/em><\/span>
    2022 Nov 22 00:43:29 switch %POAP-2-POAP_INFO: Abort Power On Auto Provisioning and continue with normal setup? (yes\/no)[n]: <\/em><\/span>
    2022 Nov 22 00:43:29 switch %VSHD-5-VSHD_SYSLOG_CONFIG_I: Configured from vty by root on vsh.15143<\/em><\/span>
    2022 Nov 22 00:43:29 switch %POAP-2-POAP_INFO: USB disk not detected<\/em><\/span>
    2022 Nov 22 00:43:29 switch %POAP-2-POAP_INFO: Start DHCP v4 session<\/em><\/span><\/pre>\n<\/blockquote>\n\n\n\n
    # show tech-support  ; \uc804\uccb4 \ub85c\uadf8\uc218\uc9d1.<\/h5>\n\n\n\n
    # show interface fc1\/1  ; \ud3ec\ud2b8\uc815\ubcf4<\/h5>\n\n\n\n
    # show interface fc1\/1 trans  ; \ud3ec\ud2b8 \uc5f0\uacb0 GBIC(transmitter) \uc815\ubcf4, \uad11\ub7c9<\/h5>\n\n\n\n
    # show interface fc1\/1 counters  ; \ud3ec\ud2b8 \ub370\uc774\ud130 \ud1b5\uacc4(error, link failure \ud30c\uc545)<\/h5>\n\n\n\n
    # show running-config  ; \uc804\uccb4 \uc124\uc815 \ud655\uc778<\/h5>\n\n\n\n
    # configure terminal interface fc1\/1  ; interface fc1\/1 \uc124\uc815<\/h5>\n\n\n\n
    ex>
    # conf term interface fc1\/1
    (config-interface fc1\/1)# no shutdown  
    ; \ub9c1\ud06c\ud50c\ub9bd\uc774\ub098 \uc2a4\uc704\uce58 rebooting\uc2dc port\uc0c1\ud0dc\uac00 shutdown\uc73c\ub85c \ubcc0\uacbd\ub420 \uc218 \uc788\uc74c. \ud56d\uc0c1 port\ub97c \ud65c\uc131\ud654\ub418\uac8c \ud558\uae30 \uc704\ud574 \uba85\uc2dc\uc801\uc73c\ub85c no shutdown \uc744 config\uc5d0 \ub123\ub294 \uac83\uc744 \uad8c\uc7a5.<\/p>\n\n\n\n
    \n\n\n\n
    2. \uae30\ubcf8 \uad6c\uc131<\/h4>\n\n\n\n
    2.1. mgmt IP \uc124\uc815<\/strong>
    # config terminal
    # interface mgmt 0
    # ip address 10.77.77.77 255.255.255.0<\/em>
    # end<\/p>\n\n\n\n
    2.2. interface \uae30\ubcf8\uc124\uc815<\/strong>
    # config terminal
    # interface interface fc1\/1-12
    # no shutdown<\/em>
    # end<\/p>\n\n\n\n
    2.3. \uc124\uc815\uc800\uc7a5<\/strong>
    # show running-config
    # copy running-config startup-config
    <\/em><\/p>\n\n\n\n
    3. SAN Zonning \uad6c\uc131<\/h4>\n\n\n\n
    3.1. \uac1c\uc694<\/strong>
    Cisco SAN Switch\uc758 zone \uad6c\uc131\uc740 vsan, zoneset, zone \uc73c\ub85c \uad6c\uc131\ub428.
    VSAN\uc740 \ub3c4\uba54\uc778\uc758 \uac1c\ub150 SAN Switch 1\uac1c\uc77c\ub54c\ub294 \ubcc4 \uc758\ubbf8\uac00 \uc5c6\uc73c\ub098 \uc5ec\ub7ec\uac1c\uc758 SAN SW\ub97c \uc0ac\uc6a9\uc2dc <\/em>
    \uc5ec\ub7ec Zone \uc124\uc815\uc744 \uad6c\ubd84\ud558\uae30 \uc704\ud568, VSAN\ud558\ub098\uc5d0 \ud558\ub098\uc758 zoneset\ub97c active \ud560 \uc218 \uc788\ub2e4.
    \uc778\ud130\ud398\uc774\uc2a4\uac00 \uc11c\ub85c \ub2e4\ub978 VSAN\uc5d0 \uc18d\ud574 \uc788\uc73c\uba74 \uac19\uc740 zoneset\ub85c \ubb36\uc744 \uc218 \uc5c6\ub2e4.
    configure -> vsan -> zoneset -> zone -> alias \ub610\ub294 interface \ub610\ub294 WWN

    zonning\uc2dc Port zonning, WWN zonning\ub85c \uad6c\ubd84.
    Port zone ; \ubb3c\ub9ac\uc801 port\ub97c \uae30\uc900\uc73c\ub85c zone\uc744 \uad6c\uc131  
    -> SAN Switch Port \uc7a5\uc560\uc2dc zone config \ubcc0\uacbd\ud544\uc694. Server(member) FC \uce74\ub4dc\uac00 \ub2ec\ub77c\uc838\ub3c4 \uac19\uc740 \ud3ec\ud2b8\uc5d0 \uc5f0\uacb0\ud558\uba74 \uac19\uc740 zone\uc744 \uc0ac\uc6a9.
    WWN zone ; Server(member) FC \uce74\ub4dc\uc758 WWPN\uc744 \uae30\uc900\uc73c\ub85c zone\ub97c \uad6c\uc131  
    -> \uac19\uc740 vsan\uc5d0 \uad6c\uc131\ub41c SAN Switch port\uc5b4\ub514\uc5d0 \uc5f0\uacb0\ud574\ub3c4 \uc791\ub3d9, \ub2e8 Server(member) FC \uce74\ub4dc \uc7a5\uc560\uad50\uccb4\uc2dc WWPN\ub3c4 \ubcc0\uacbd\ub418\ubbc0\ub85c zone config \ubcc0\uacbd\ud544\uc694.
    <\/em>
    3.2. Alias \uc124\uc815 <\/strong>
    (https:\/\/www.cisco.com\/c\/ko_kr\/support\/docs\/storage-networking\/storage-networking\/200230-SAN-How-To-Zoning-Methods.html)<\/code>
     <\/em>; \uc8fc\ub85c WWN\uc73c\ub85c zone\uc2dc \uc0ac\uc6a9.(WWN\uc774 Server\ub530\ub77c \ubcc0\uacbd\ub418\uae30 \ub54c\ubb38\uc5d0 alias\uc0ac\uc6a9)
    switch# conf t
    switch(config)
    switch(config)# device-alias database
    switch(config-device-alias-db)# device-alias name HOST pwwn 21:01:00:e0:8b:39:a9:07<\/code>
    -> pwwn 21…07\uc744 HOST\ub780 \uc774\ub984\uc73c\ub85c \uc9c0\uc815. \ud5a5\ud6c4 zone \uad6c\uc131\uc2dc pwwn \uc804\uccb4\ub97c \ub123\uc9c0 \uc54a\uace0 HOST\ub780 \uc774\ub984\uc73c\ub85c \uc9c0\uc815

    3.3. \ud604\uc7ac active zoneset \ud655\uc778<\/strong>
    show zoneset active
    3. zoneset \/ zone \uc0c8\ub85c \uc0dd\uc131
    show flogi database                       -> wwn \ud655\uc778
    config terminal
    zoneset name testzoneset01 vsan 1   -> zoneset \uc0dd\uc131 conf term
    zone name testzone01                    -> testzoneset01\ub0b4 testzone01 \uc0dd\uc131  
    member pwwn 21:00:00:24:ff:3e:76:e4  -> testzone01\uc5d0 pwwn member \ucd94\uac00
    member pwwn 21:00:00:24:ff:3e:76:98  -> testzone01\uc5d0 pwwn member \ucd94\uac00
    zone name testzone02
    member pwwn 21:00:00:24:ff:3e:76:e4  -> testzone02\uc5d0 pwwn member \ucd94\uac00
    member pwwn 21:00:00:24:ff:3e:76:98  -> testzone02\uc5d0 pwwn member \ucd94\uac00
    show zoneset

    3.4. zoneset \uc801\uc6a9<\/strong>
    config terminal
    zoneset activate name testzoneset01 vsan 1

    \ud655\uc778 
    show zoneset active

    config terminal
    no zoneset activate name testzoneset01 vsan 1  -> zoneset \uc801\uc6a9\ud574\uc81c
    no zoneset name testzoneset01 vsan 1             -> zoneset \uc0ad\uc81c

    3.5. port zonning \uc0dd\uc131 <\/strong>
    – vsan \uc124\uc815 
    (\uc608\uc2dc\uc5d0\uc11c\ub294 port zone\uc744 \uc704\ud574 \ubcc4\ub3c4 vsan 20\ubc88\uc744 \uc0dd\uc131, wwn zone\uacfc \ub3d9\uc77c zoneset\uc5d0 \ub123\uc73c\ub824\uba74 vsan 1\uc744 \uc774\uc6a9\ud574\uc57c \ub428. \ubcc4\ub3c4\uc758 \uc124\uc815 \uc5c6\uc744\uc2dc\uc5d0 \uc804\uccb4 interface\ub294 vsan 1\ubc88\uc73c\ub85c default \uc9c0\uc815\ub418\uc5b4 \uc788\uc74c.)

    config terminal
    vsan database
    vsan 20
    vsan 20 interface fc1\/2, fc1\/3 -> “y” \uc120\ud0dd
    – port zoning \uc124\uc815
    config terminal
    zoneset name portzoneset01 vsan 20
    zone name portzone01
    member interface fc1\/2
    member interface fc1\/3
    end
    config terminal
    zoneset activate name portzoneset01 vsan20
    show zoneset active vsan 20

    3.6. zone \uc0ad\uc81c<\/strong>
    config terminal
    no zone name testzone01 vsan 1     -> active \uacfc\uc815\uc5c6\uc774 \uc0ad\uc81c\uc2dc\ub294 \ubc14\ub85c \uc0ad\uc81c.
    show zoneset active vsan 1            -> \ud655\uc778

    3.7. zoneset \ubcf5\uc81c<\/strong>
    zone copy active-zoneset full-zoneset vsan 1<\/p>\n\n\n\n
    **zoneset\ub294 \ud55c \uc2a4\uc704\uce58\uc5d0 1\uac1c\ub9cc \ud65c\uc131\ud654 \uac00\ub2a5.<\/p>\n\n\n\n
    \n
    <Port Zonning \uad6c\uc131 \uc608>

    <\/strong>
    config t \nzoneset name portzoneset01 vsan 1\nzone name server1-1\nmember interface fc1\/1\nmember interface fc1\/22\nzone name server1-2\nmember interface fc1\/1\nmember interface fc1\/23\n\nzone name server2-1\nmember interface fc1\/2\nmember interface fc1\/22\nzone name server2-2\nmember interface fc1\/2\nmember interface fc1\/23\n\nzone name server3-1\nmember interface fc1\/3\nmember interface fc1\/22\nzone name server3-2\nmember interface fc1\/3\nmember interface fc1\/23\n\nzone name server10-1\nmember interface fc1\/10\nmember interface fc1\/22\nzone name server10-2\nmember interface fc1\/10\nmember interface fc1\/23\n\nzone name server11-1\nmember interface fc1\/11\nmember interface fc1\/22\nzone name server11-2\nmember interface fc1\/11\nmember interface fc1\/23\n\nzone name server12-1\nmember interface fc1\/12\nmember interface fc1\/22\nzone name server12-2\nmember interface fc1\/12\nmember interface fc1\/23\n\nzone name server18-1\nmember interface fc1\/18\nmember interface fc1\/22\nzone name server18-2\nmember interface fc1\/18\nmember interface fc1\/23\n\nshow zoneset portzoneset01 vsan 1\nend\n\nconf t \nzoneset activate name portzoneset01 vsan 1\nshow zoneset active

    <\/code><\/pre>\n\n\n\n
    show zoneset active
    ################### \ucd9c\ub825\uac12 #######################
    zoneset name portzoneset01 vsan 1<\/span>
    zone name server1-1 vsan 1<\/span>
    * fcid 0x080500 [interface fc1\/1 swwn 20:00:00:08:31:0d:31:40]<\/span>
    * fcid 0x080700 [interface fc1\/22 swwn 20:00:00:08:31:0d:31:40]<\/span>

    zone name server1-2 vsan 1<\/span>
    * fcid 0x080500 [interface fc1\/1 swwn 20:00:00:08:31:0d:31:40]<\/span>
    * fcid 0x080800 [interface fc1\/23 swwn 20:00:00:08:31:0d:31:40]<\/span>

    zone name server2-1 vsan 1<\/span>
    * fcid 0x080400 [interface fc1\/2 swwn 20:00:00:08:31:0d:31:40]<\/span>
    * fcid 0x080700 [interface fc1\/22 swwn 20:00:00:08:31:0d:31:40]<\/span>

    zone name server2-2 vsan 1<\/span>
    * fcid 0x080400 [interface fc1\/2 swwn 20:00:00:08:31:0d:31:40]<\/span>
    * fcid 0x080800 [interface fc1\/23 swwn 20:00:00:08:31:0d:31:40]<\/span>

    zone name server3-1 vsan 1<\/span>
    * fcid 0x080300 [interface fc1\/3 swwn 20:00:00:08:31:0d:31:40]<\/span>
    * fcid 0x080700 [interface fc1\/22 swwn 20:00:00:08:31:0d:31:40]<\/span>

    zone name server3-2 vsan 1<\/span>
    * fcid 0x080300 [interface fc1\/3 swwn 20:00:00:08:31:0d:31:40]<\/span>
    * fcid 0x080800 [interface fc1\/23 swwn 20:00:00:08:31:0d:31:40]<\/span>

    zone name server10-1 vsan 1<\/span>
    * fcid 0x080200 [interface fc1\/10 swwn 20:00:00:08:31:0d:31:40]<\/span>
    * fcid 0x080700 [interface fc1\/22 swwn 20:00:00:08:31:0d:31:40]<\/span>

    zone name server10-2 vsan 1<\/span>
    * fcid 0x080200 [interface fc1\/10 swwn 20:00:00:08:31:0d:31:40]<\/span>
    * fcid 0x080800 [interface fc1\/23 swwn 20:00:00:08:31:0d:31:40]<\/span>

    zone name server11-1 vsan 1<\/span>
    * fcid 0x080100 [interface fc1\/11 swwn 20:00:00:08:31:0d:31:40]<\/span>
    * fcid 0x080700 [interface fc1\/22 swwn 20:00:00:08:31:0d:31:40]<\/span>

    zone name server11-2 vsan 1<\/span>
    * fcid 0x080100 [interface fc1\/11 swwn 20:00:00:08:31:0d:31:40]<\/span>
    * fcid 0x080800 [interface fc1\/23 swwn 20:00:00:08:31:0d:31:40]<\/span>

    zone name server12-1 vsan 1<\/span>
    * fcid 0x080900 [interface fc1\/12 swwn 20:00:00:08:31:0d:31:40]<\/span>
    * fcid 0x080700 [interface fc1\/22 swwn 20:00:00:08:31:0d:31:40]<\/span>

    zone name server12-2 vsan 1<\/span>
    * fcid 0x080900 [interface fc1\/12 swwn 20:00:00:08:31:0d:31:40]<\/span>
    * fcid 0x080800 [interface fc1\/23 swwn 20:00:00:08:31:0d:31:40]<\/span>

    zone name server18-1 vsan 1<\/span>
    * fcid 0x080600 [interface fc1\/18 swwn 20:00:00:08:31:0d:31:40]<\/span>
    * fcid 0x080700 [interface fc1\/22 swwn 20:00:00:08:31:0d:31:40]<\/span>

    zone name server18-2 vsan 1<\/span>
    * fcid 0x080600 [interface fc1\/18 swwn 20:00:00:08:31:0d:31:40]<\/span>
    * fcid 0x080800 [interface fc1\/23 swwn 20:00:00:08:31:0d:31:40]<\/span><\/pre>\n\n\n\n
    \n\n<\/code><\/pre>\n<\/blockquote>\n\n\n\n

    ** \ucd5c\uc885 \ubcc0\uacbd \ud6c4, SAVE \ud544\uc694 “copy running-config starting-config”<\/p>\n","protected":false},"excerpt":{"rendered":"
    1. \uc0c1\ud0dc\ud655\uc778 \uba85\ub839\uc5b4 # show version ; \ubc84\uc804 \ud655\uc778 SAN8P# show versionCisco Nexus Operating System (NX-OS) SoftwareTAC support: http:\/\/www.cisco.com\/tacDocuments: …SoftwareBIOS: version 2.1.17loader: version N\/Akickstart: version […]<\/p>\n","protected":false},"author":1,"featured_media":326,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[96,89,91,90,95,94],"class_list":["post-329","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-tech","tag-alias","tag-cisco","tag-cli","tag-san","tag-switch","tag-zone"],"_links":{"self":[{"href":"https:\/\/iwgh.duckdns.org\/index.php?rest_route=\/wp\/v2\/posts\/329","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/iwgh.duckdns.org\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/iwgh.duckdns.org\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/iwgh.duckdns.org\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/iwgh.duckdns.org\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=329"}],"version-history":[{"count":7,"href":"https:\/\/iwgh.duckdns.org\/index.php?rest_route=\/wp\/v2\/posts\/329\/revisions"}],"predecessor-version":[{"id":342,"href":"https:\/\/iwgh.duckdns.org\/index.php?rest_route=\/wp\/v2\/posts\/329\/revisions\/342"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/iwgh.duckdns.org\/index.php?rest_route=\/wp\/v2\/media\/326"}],"wp:attachment":[{"href":"https:\/\/iwgh.duckdns.org\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=329"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/iwgh.duckdns.org\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=329"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/iwgh.duckdns.org\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=329"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}